Administrator Guide

Removing a host group
To remove a host group:
1. In the AMW, select the Host Mappings tab, select the host group node in the object tree.
2. Perform one of these actions:
• From the menu bar, select Host Mappings > Host Group > Remove.
• Right-click the host group node, and select Remove from the pop-up menu.
The Remove dialog is displayed.
3. Click Yes.
The selected host group is removed.
Host topology
Host topology is the organization of hosts, host groups, and host interfaces configured for a storage array. You can view the host
topology in the Host Mappings tab of the AMW. For more information, see Using The Host Mappings Tab.
The following tasks change the host topology:
• Moving a host or a host connection
• Renaming a host group, a host, or a host connection
• Adding a host connection
• Replacing a host connection
• Changing a host type
The MD Storage Manager automatically detects these changes for any host running the host agent software.
Starting or stopping the Host Context Agent
The Host Context Agent discovers the host topology. The Host Context Agent starts and stops with the host. The topology discovered by
the Host Context Agent can be viewed by clicking Configure Host Access (Automatic) in the Configure tab in the MD Storage
Manager.
You must stop and restart the Host Context Agent to see the changes to the host topology if:
• A new storage array is attached to the host server.
• A host is added while turning on power to the RAID controller modules.
To start or stop the Host Context Agent on Linux, enter the following commands at the prompt:
SMagent start
SMagent stop
You must stop and then restart SMagent after:
• Moving a controller offline or replacing a controller.
• Removing host-to-array connections from or attaching host-to-array connections to a Linux host server.
To start or stop the Host Context Agent on Windows:
1. Do one of the following:
• Click Start > Settings > Control Panel > Administrative Tools > Services
• Click Start > Administrative Tools > Services
2. From the list of services, select Modular Disk Storage Manager Agent.
3. If the Host Context Agent is running, click Action > Stop, then wait approximately 5 seconds.
4. Click Action > Start.
I/O data path protection
You can have multiple host-to-array connections for a host. Ensure that you select all the connections to the array when configuring host
access to the storage array.
54
About your host