CLI Guide

Parameters
Parameter Description
eventType
This parameter is the integer value for the event.
Enter the event value in a hexadecimal format, for
example, 0x280D. Always begin the hexadecimal
value with 0x to indicate that it is in hexadecimal
format. If you do not use 0x, the value will be
interpreted as a decimal and converted to a
hexadecimal value, before applying the block or
unblock command. This can cause an incorrect
event to be blocked or unblocked.
An error is displayed if you enter an invalid event.
Set FIPS physical disk security identifier
Description
This command is used to reset a FIPS physical disk back to the original manufacturer settings. This may
be necessary if the physical disk is locked due to an invalid or missing security key file or unknown pass
phrase. All existing physical disk data will be erased.
WARNING: This command resets a FIPS physical disk back to the original manufacturer settings
and erases all existing physical disk data. This operation is completely irreversible.
To erase an SED physical disk, use the start secureErase command.
Syntax
set physicalDisk [enclosureID,drawerID,slotID] securityID="string";
Parameters
Table 18. Physical disk security parameters
Parameter Description
physical disk
The location of the physical disk that you want to
set the security ID. For dense expansion
enclosures, specify the enclosure ID value, the
drawer ID value, and the slot ID value for the
physical disk. For non-dense expansion
enclosuress, specify the enclosure ID value and the
slot ID value for the physical disk. Enclosure ID
values are 0 to 99 . Drawer ID values are 0 to 4.
Slot ID values are 0 to 59.
298