CLI Guide

Parameter Description
must enclose the virtual disk name in double
quotation marks (" ") inside square brackets.
syncInterval
Specify the length of time between automatically
sending updates of modified data from the local
storage array to the remote storage array. You can
specify the length of time in minutes, hours, or
days.
warningSyncThreshold
Specify the length of time to wait until a warning is
triggered for cases in which the synchronization of
all of the virtual disks within the remote replication
group takes longer than the defined time. You can
specify the length of time in minutes, hours, or
days.
warningRecoveryThreshold
Specify the length of time to wait until a warning is
triggered when the automatic data update for the
point-in-time image on the remote storage array is
older than the defined time. Define the threshold
from the end of the previous update. You can
specify the length of time in minutes, hours, or
days.
NOTE: You must set the Recovery Point
Threshold to be twice as large as the
synchronization interval threshold.
warningThresholdPercent
Specify the percent value that determines when a
warning is triggered when the capacity of a
replication repository virtual disk reaches the
defined percentage. Define the threshold by
percentage (%) of the capacity remaining.
userLabel
The new name that you want to give to the remote
replication group. Use this parameter when you
want to rename the remote replication group.
Enclose the new remote replication group name in
double quotation marks (" ").
autoResync
The settings for automatic resynchronization
between the primary virtual disks and the
secondary virtual disks of a remote replicated pair
within a remote replication group. This parameter
has these values:
• enabled—Automatic resynchronization is
turned on. You do not need to do anything
further to resynchronize the primary virtual disk
and the secondary virtual disk.
• disabled—Automatic resynchronization is
turned off. To resynchronize the primary virtual
disk and the secondary virtual disk, you must
315