CLI Guide

Set Storage Array iSNS Server Listening Port
Description
This command sets the iSNS server listening port.
Syntax
set storageArray isnsListeningPort=listeningPortIPAddress
Parameter
Parameter Description
isnsListeningPort
The IP address that you want to use for the iSNS
server listening port. The range of values for the
listening port is 49152 to 65535. The default value
is 3205.
Additional Information
A listening port resides on the database server and is responsible for these activities:
• Listening (monitoring) for incoming client connection requests
• Managing the traffic to the server
When a client requests a network session with a server, a listener receives the actual request. If the client
information matches the listener information, then the listener grants a connection to the database
server.
Set Storage Array Learn Cycle
Description
This command sets the learn cycle for the battery backup unit. The learn cycle enables the MD storage
management software to predict the remaining battery life. Learn cycles run at set intervals and store the
results for software analysis.
Syntax
set storageArray learnCycleDate
(daysToNextLearnCycle=numberOfDays |
day=dayOfTheWeek) time=HH:MM
Parameters
Parameter Description
daysToNextLearnCycle
Valid values are 0 through 7, where, 0 is
immediately and 7 is in seven days. The
daysToNextLearnCycle parameter takes place
333