CLI Guide

Parameter Description
this parameter to TRUE. To turn off caching
without batteries, set this parameter to FALSE.
mediaScanEnabled
The setting to turn on or turn off media scan for
the virtual disk. To turn on media scan, set this
parameter to TRUE. To turn off media scan, set this
parameter to FALSE. (If media scan is disabled at
the storage array level, this parameter has no
effect.)
mirrorCacheEnabled
The setting to turn on or turn off the replication
cache. To turn on the replication cache, set this
parameter to TRUE. To turn off the replication
cache, set this parameter to FALSE.
modificationPriority
The priority for virtual disk modifications while the
storage array is operational. Valid values are
highest, high, medium, low, or lowest.
owner
The RAID controller module that owns the virtual
disk. Valid RAID controller module identifiers are 0
or 1, where, 0 is the RAID controller module in slot
0, and 1 is the RAID controller module in slot 1. Use
this parameter only if you want to change the
virtual disk owner.
readCacheEnabled
The setting to turn on or turn off the read cache.
To turn on the read cache, set this parameter to
TRUE. To turn off the read cache, set this
parameter to FALSE.
writeCacheEnabled
The setting to turn on or turn off the write cache.
To turn on the write cache, set this parameter to
TRUE. To turn off the write cache, set this
parameter to FALSE.
cacheReadPrefetch
The setting to turn on or turn off cache read
prefetch. To turn off cache read prefetch, set this
parameter to FALSE. To turn on cache read
prefetch, set this parameter to TRUE.
addCapacity
The setting to increase the storage size (capacity)
of the virtual disk for which you are defining
properties. Size is defined in units of bytes, KB, MB,
GB, or TB. The default value is bytes.
NOTE: A space must be added between the
last digit and the size (bytes, KB, MB, or GB) for
values greater than 9.
addPhysicalDisks
Adds new physical disks to the virtual disk. Specify
the enclosure ID and slot ID for each physical disk
that you assign to the virtual disk. Enclosure ID
339