CLI Guide

Unregister SNMP Community
Description
This command deletes an existing Simple Network Management Protocol (SNMP) community that you
previously created and registered using the create snmpCommunity command. Deleting an SNMP
community effectively unregisters the community. Any trap destinations associated with that community
are also removed.
Syntax
delete snmpCommunity communityName="snmpCommunityName"
Parameters
Parameter Description
communityName The name of the SNMP community that you want
to delete. Enclose the SNMP community name in
double quotation marks (" ").
Unregister SNMP Trap Destination
Description
This command deletes an existing Simple Network Management Protocol (SNMP) trap destination that
you previously created and registered using the create snmpTrapDestination command.
Syntax
delete snmpTrapDestination trapReceiverIP=ipAddress
Parameters
Parameter Description
trapReceiverIP The IP address of the SNMP manager from which
you want to stop sending trap messages.
Update SNMP Community
Description
This command creates a new name for an existing Simple Network Management Protocol (SNMP)
community.
420