CLI Guide

Parameter Description
primary virtual disk or the secondary virtual disk of
a remote replication pair. Enclose the virtual disk
name in square brackets ([ ]). If the virtual disk
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (" ").
timeout
The time interval within which the software can
return the remote replication virtual disk status.
The timeout value is in minutes.
NOTE: This command waits until the status becomes Optimal or the timeout interval expires.
Check Remote Replication Group Consistency
Description
This command applies to a remote replication group that has underlying repository virtual disks. The
command produces a report based on analysis of the data in the repository.
Syntax
check asyncRemoteReplicationGroup[asyncRemoteReplicationGroupName]
repositoryConsistency localVirtualDisk=["localVirtualDiskName"]
file="filePath"
Parameters
Parameter Description
asyncRemoteReplicationGroup
The alphanumeric identifier (including - and _) of
the remote replication group on which to run a
consistency check. Enclose the remote replication
group identifier in square brackets ([ ]).
localVirtualDisk
Specifies the alphanumeric identifier of a local
virtual disk that participates in the replication
relationship. You can specify a local virtual disk that
is either the source or the destination on a
replication relationship. Enclose the local virtual
disk identifier in double quotation marks (" ") within
square brackets ([ ]).
file
The file path and the file name to which you want
to save the report that results from the consistency
check. Enclose the file name in double quotation
marks (" "). For example: file="C:\Program Files\CLI
\logs \repoConsistency.txt"
This parameter must appear last, after any of the
optional parameters.
148