CLI Guide

Check Repository Consistency
Description
This command applies to a number of objects that have underlying repository virtual disks. The command
produces a report based on analysis of the data in the repository.
Syntax
check (snapGroup[snapGroupName] repositoryConsistency | snapVirtualDisk
[snapVirtualDiskName] repositoryConsistency | virtualDisk [virtualDiskName]
repositoryConsistency | virtualDiskCopy target [targetName]
repositoryConsistency | localVirtualDisk="localVirtualDiskName") file="filePath"
Parameters
Parameter Description
repositoryConsistency
Specifies that the snapshot group, snapshot virtual
disk, or virtual disk (depending on which is
specified by the corresponding parameter) is
checked for consistency.
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group on which to run a consistency
check. Enclose the snapshot group identifier in
square brackets ([ ]).
snapVirtualDisk
The alphanumeric identifier (including - and _) of
the snapshot virtual disk on which to run a
consistency check. Enclose the snapshot virtual
disk identifier in square brackets ([ ]).
virtualDisk
The alphanumeric identifier (including - and _) of
the thin virtual disk on which to run a consistency
check. Enclose the virtual disk identifier in square
brackets ([ ]).
virtualDiskCopy
Specifies that the target of a virtual disk copy
relationship is checked for consistency.
target
Use only in conjunction with the
virtualDiskCopy parameter to specify the
alphanumeric identifier of the virtual disk that is the
target of the virtual disk copy relationship. Enclose
the virtual disk identifier in double quotation marks
(" ").
file
The file path and the file name to which you want
to save the report that results from the consistency
check. Enclose the file name in double quotation
marks (" "). For example: file="C:\Program Files\CLI
149