CLI Guide

Parameters
Parameter Description
enable
Enable automatic collection of support bundles
when a critical MEL event is detected.
disable
Disable automatic collection of support bundles
where the feature was previously enabled.
all
Apply the command to all storage arrays detected
from the host.
storageArrayName
Apply the command to the named storage array.
data
Store the data generated by the command at the
location specified by the directorypath.
Convert Snapshot (Legacy) Virtual Disk To Snapshot
Group
Description
This command migrates a snapshot (legacy) virtual disk to a snapshot group and converts an existing
snapshot (legacy) repository virtual disk to a snapshot image repository virtual disk. A maximum of four
snapshots (legacy) can be converted to a snapshot group. None of the snapshots (legacy) can be in a
disabled state or involved in an in-progress virtual disk copy operation. If the base virtual disk has more
than four snapshots (legacy), you must delete the extra snapshots before running this command.
Syntax
convert snapshotVirtualDisk baseVirtualDisk="baseVirtualDiskName"
Parameter
Parameter Description
baseVirtualDisk
The alphanumeric identifier (including - and _) of
the base virtual disk that has the snapshots (legacy)
that you want to convert into a snapshot group.
Enclose the base virtual disk name in double
quotation marks (" ").
Create Consistency Group
NOTE: This command does not apply to the snapshot (legacy) commands.
158