CLI Guide

[enableSchedule=(TRUE | FALSE)]
[schedule=(immediate | snapshotSchedule)]
Parameters
Parameter Description
baseVirtualDisk
The name of the base virtual disk from which you
want to take a snapshot (legacy). Enclose the base
virtual disk name in double quotation marks (" ").
repositoryRAIDLevel
Use this parameter when you create a new disk
group.
The RAID level for the snapshot (legacy) repository
disk group. Valid values are 0,1, 5, or 6.
repositoryPhysicalDisks
Use this parameter when you create a new disk
group.
The physical disks that you want to assign to the
snapshot (legacy) repository disk group. Specify the
enclosure ID value and the slot ID value for each
physical disk that you assign to the snapshot
(legacy) repository virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. Enclose the
enclosure ID values and the slot ID values in
parentheses.
repositoryPhysicalDiskCount
Use this parameter when you create a new disk
group.
The number of unassigned physical disks that you
want to use for the snapshot (legacy) repository
disk group.
repositoryDiskGroupUserLabel
Use this parameter when you create a new disk
group.
The name of a new disk group to be used for the
repository virtual disk. Enclose the repository disk
group name in double quotation marks (“ ”).
repositoryDiskGroup
The name of an existing disk group where you
want to place the repository virtual disk. Use this
parameter if you do not want to put the repository
virtual disk in the same disk group as the base
virtual disk. The default is to use the same disk
group for both the base virtual disk and the
repository virtual disk. Enclose the name of the
repository disk group in double quotation marks ("
").
userLabel
The name that you want to give to the snapshots
(legacy) virtual disk. If you do not want to provide a
name, the CLI creates a name using the base
virtual disk user label that you provide.
197