CLI Guide

Delete iSCSI Initiator
Description
This command deletes a specific iSCSI initiator object.
Syntax
delete iscsiInitiator (["iSCSI-ID "| "name"])
Parameters
Parameters Description
iSCSI-ID
The identifier of the iSCSI initiator that you want to
delete. Enclose the name in double quotation
marks (" ").
name
The name of the iSCSI initiator that you want to
delete. Enclose the name in double quotation
marks (" ").
Example
-c "delete iscsiInitiator [\"job29002\"];"
Delete Snapshot Group
CAUTION: Possible damage to the storage array configuration – All of the data in the snapshot
group is lost as soon as you run this command.
Description
This command deletes an entire snapshot group and optionally the associated member virtual disks.
Syntax
delete snapGroup ["snapGroupName"] [deleteRepositoryMembers=(TRUE | FALSE)]
Parameters
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group that you want to delete.
Enclose the snapshot group identifier in double
quotation marks (" ") inside square brackets ([ ]).
deleteRepositoryMembers
The parameter to save or delete the member
virtual disks. To save the member virtual disks, set
this parameter to FALSE. To delete the member
214