CLI Guide

Syntax
disable storageArray (featurePack | feature=featureAttributeList)
The featureAttributeList can be one or more of these attribute values. If you enter more than one attribute
value, separate the values with a space.
• virtualDiskCopy
• snapshot
• asyncReplication
• remoteReplication
• mixedPhysicalDiskTypes
• goldKey
• driveSecurity
• enterpriseSecurityKeyMgr
• thinProvisioning
• storagePartition[2|4|8|16|32|64|96|128|192|256|512|Max]
The form for this attribute value is a combination of the alphabetical term merged with the numerical
value, for example, storagePartition256
• physicalDiskSlotLimit[16|24|32|48|60|64|72|96|112|10|128|136|144|180|192|256| 272|300|360|384|448|
480|Max]
The form for this attribute value is a combination of the alphabetical term merged with the numerical
value, for example, physicalDiskSlotLimit360
• ssdCache
• SSDSupport
• highPerformanceTier
• raid6
NOTE: The following attribute is for enabling the snapshot (legacy) feature only.
• snapshot[2|4|8|16]
The form for this attribute value is a combination of the alphabetical term merged with the numerical
value, for example, snapshot16
NOTE: The remoteReplication attribute is valid only for firmware versions before 7.84. Starting with
firmware 7.84 the remoteReplication attribute is replaced by remoteReplication.
• remoteReplication[8|16|32|64|128]
The form for this attribute value is a combination of the alphabetical term merged with the numerical
value, for example, remoteReplication128
Parameters
None.
225