CLI Guide

Save Storage Array Performance Statistics
Description
This command saves the performance statistics to a file. Before you use this command, issue the
set session performanceMonitorInterval and set session
performanceMonitorIterations commands to specify how often statistics are collected.
Syntax
save storageArray performanceStats file="filename"
Parameters
Parameter Description
file
Specifies name of the file to which to save the
performance statistics. You must put quotation
marks (" ") around the file name.
Save Storage Array SAS PHY Counts
Description
This command saves the storage array SAS physical layer (SAS PHY) counters to a file. To reset the SAS
PHY counters, run the Reset Storage Array SAS PHY Baseline command. See Reset Storage
Array SAS PHY Baseline.
Syntax
save storageArray SASPHYCounts file="filename"
Parameters
Parameter Description
file
Specifies the file path and the file name to which
you save the SAS PHY counters. Enclose the file
path and the file name in double quotation marks ("
"). For example: file="C:\Program Files\CLI\logs
\sasphy.csv"
This command does not automatically append a
file extension to the saved file. Any file name is
acceptable, but the .csv extension must be used.
286