Support Matrix
Table Of Contents
- Dell EMC PowerVault MD34XX/38XX Series Support Matrix
- Introduction
- Data protocols
- Dell EMC PowerVault MD Series storage array rules
- Default IPv4 settings for management ports on Dell EMC PowerVault MD series storage arrays
- RAID controller firmware and NVSRAM
- iSCSI software initiators
- Protocol (TOE/iSCSI) offload adapters
- Fibre Channel SFP+ Transceiver support
- Physical disks
- Expansion enclosures
- Management software
- Operating systems
- Windows ODX
- ALUA support on host operating systems
- Device mapper software
- SAS host bus adapters
- Fibre Channel host bus adapters
- Fibre Channel direct-attach configuration operating systems
- Required timeout settings for Fibre Channel host bus adapters
- Supported Fibre Channel switches
![](/manual/dell/powervault-md3800f/support-matrix-english/images/img-2.png)
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2015 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
2020 - 01
Rev. A25