Support Matrix
Table Of Contents
- Dell EMC PowerVault MD34XX/38XX Series Support Matrix
- Introduction
- Data protocols
- Dell EMC PowerVault MD Series storage array rules
- Default IPv4 settings for management ports on Dell EMC PowerVault MD series storage arrays
- RAID controller firmware and NVSRAM
- iSCSI software initiators
- Protocol (TOE/iSCSI) offload adapters
- Fibre Channel SFP+ Transceiver support
- Physical disks
- Expansion enclosures
- Management software
- Operating systems
- Windows ODX
- ALUA support on host operating systems
- Device mapper software
- SAS host bus adapters
- Fibre Channel host bus adapters
- Fibre Channel direct-attach configuration operating systems
- Required timeout settings for Fibre Channel host bus adapters
- Supported Fibre Channel switches
Date Description
Updated version of CFW and HSW
Updated supported operating systems
Updated storage array rules for dense array section
October 2016
Updated version of CFW
Updated supported physical disks section
July 2016
Added support for VMware with Fibre Channel Direct Connect
Updated version of CFW and HSW
Updated supported physical disks section
Updated supported operating systems
March 2016
Discontinued support of the VSS and VDS hardware providers.
Updated version of CFW and HSW
Updated supported physical disks section
Updated supported operating systems
November 2015 Updated the Windows ODX support section
October 2015
Updated supported physical disks section
Updated storage array rules for all models section
Updated expansion enclosures section
Updated the Windows ODX support section
September 2015
Updated AppAware section
Added column to the HDD that specifies if a HDD is SED capable
Updated version of CFW and HSW
July 2015
Updated supported physical disks section
Updated supported Management Software
Updated supported operating systems
Updated Dell PowerVault MD-Series storage array rules
June 2015
Updated RAID controller NVSRAM and supported physical disk drive models
Introduction 5