Users Guide

10. Ensure that the array was added successfully.
11. Click Next.
12. Repeat step 7 for the peer site’s storage array.
13. Ensure that the array pair check box is selected, and then click Next.
14. Verify the summary information, and then click Finish.
Not all the SRM setup procedures are complete, just the SRA portion. Create Protection Groups and Recovery Plans for your
environment to complete the process. For more information about conguration steps, see the
VMware Site Recovery Manager
Administrator Guide.
https://www.vmware.com/support/pubs/srm_pubs.html
Conguring protection groups
1. From the Sites list, select one of the site names to congure.
2. On the Related Objects tab, click Protection Groups, and then click the Create Protection Group icon.
3. In the Create Protection Group wizard, type a name for the protection group that you want to create.
4. Verify the protection group type settings, and then click Next.
5. To add to the protection group and verify the VMs for the protection group, select the Datastore Groups.
Figure 7. Create Protection Group
6. Type a description for this protection group, if necessary.
7. Review summary information, and then click Finish.
8. Repeat steps 1-6 for any other protection groups that you require.
14