Users Guide
1. Obtain the latest SRM software and any required patches.
2. Congure the SRM databases at each site.
3. Install SRM at the protected site.
4. Install SRM at the recovery site.
5. Pair sites.
If you are using array-based replication, complete the following tasks at both sites:
1. Install SRAs
2. Congure array managers
After you have established the required infrastructure, complete the following steps:
1. Congure inventory mappings.
2. Congure placeholder datastores.
3. If you are using VR, congure datastore mappings.
4. Create protection groups.
5. Protect virtual machines (VMs).
6. Create recovery plans.
5