Owner manual

Installing Array Components

Recommended Tools

You may need the following items to perform the procedures in this section:

• Key to the system keylock

• #2 Phillips screwdriver

• Wrist grounding strap

Front Bezel (Optional)

Removing the Front Bezel

1. Using the system key, unlock the front bezel (if locked).

2. Lift the release latch next to the keylock.

3. Rotate the left end of the bezel away from the front panel.

4. Unhook the right end of the bezel and pull the bezel away from the system.

Figure 10. Removing and Installing the Front Bezel

1. bezel 2. keylock

3. release latch 4. hinge tab

Installing the Front Bezel

1. Hook the right end of the bezel onto the chassis.

2. Fit the free end of the bezel onto the system.