Owners Manual

Power Indicator Codes and Features
Figure 6. Power Indicator Codes and Features
Table 3. Power Indicator Codes and Features
Item LED Type Icon Description
1 DC power The LED lights green when the DC output voltage is within the limit.
If this LED is off, it indicates that the DC output voltage are not within
the limit.
2 Power supply/
cooling fan fault
The LED lights amber when the DC output voltage is not within the limit
or a fault with the fan is detected.
If this LED is off, it indicates that no fault condition is present.
3 AC power The LED lights green when the AC input voltage is within the limit.
If this LED is off, it indicates either there is no power or the AC input
voltage is not within the limit.
4 Power connector Connect the external power supply to this connector.
5 Power switches (2) The power switch controls the power supply output to the enclosure.
Related Documentation
NOTE: For all PowerVault documentation, go to dell.com/powervaultmanuals.
NOTE: For all Dell EMC OpenManage documents, go to dell.com/openmanagemanuals.
NOTE: For all storage controller documents, go to dell.com/storagecontrollermanuals.
You product documentation includes:
● Dell EMC PowerVault MD3400/3420/3800i/3820i/3800f/3820f Storage Arrays Getting Started Guide — Provides an
overview of system features, setting up your system, and technical specifications. This document is shipped with your
system.
● Rack Installation Instructions — Describes how to install your system into a rack. This document is shipped with your rack
solution.
● Dell EMC PowerVault MD Series Storage Arrays Administrator's Guide — Provides information about configuring and
managing the system using the MDSM GUI.
About Your System
9