Owner manual

Figure 9. Site Recovery Manager Advanced Settings

2. Click storage and set the following values:

– storage.commandTimeout = 900

– storageProvider.hostRescanRepeatCnt = 2

– storageProvider.hostRescanTimeoutSec = 900

3. Click OK to save your changes.

4. Click storageProvider and set the following values:

storageProvider.fixRecoveredDatastoreNames = enabled

ESX/ESXi Host Settings

The following changes are recommended for ESX/ESXi host settings:

• Disk.MaxLUN — Set this value slightly larger than the number of LUNs mapped to the ESX/ESXi host. This

provides faster rescan operations by not scanning all 256 LUN possibilities.

• Disk.UseDeviceReset = 1

and

Disk.UseLunReset = 0

Disk.UseDeviceReset and Disk.UseLunReset are used together to indicate how device resets are

issued.