Users Guide
Chapter 6 Advanced Reporting
Working With Advanced Reporting Reports
Dell PowerVault ML6000 User’s Guide 137
• Attribute—Specifies which values are included in the report, and how
they are combined. Select in any combination, including all (default).
If you select no attributes, the report uses Cartridge Barcode.
• Cartridge Barcode — All relevant tape cartridges.
• Drive Physical SN — All relevant tape drives.
• TapeAlert — All TapeAlert flags that were issued. For a
description of all TapeAlert flags, see Appendix B, TapeAlert
Flag Descriptions.
• Chart — Specifies how the data is displayed in the chart. Choose
Area, Bar (default), Line, or Pie.
• Type — Specifies the chart type. Select one of the following:
• Rollup (default) — Displays the number of TapeAlerts for the
combination of Grouping and Attributes you selected (default).
• Trend — Shows the occurrence of TapeAlerts over time.
• Grouping—Specifies which drive(s) or tape cartridge(s) on which to
base the report. Choose one of the following:
• All (default) — All tape drives and tape cartridges for which a
TapeAlert was issued during the specified Date Range.
• Selected Drive by Physical SN — An individual tape drive. Only
tape drives which issued a TapeAlert during the specified Date
Range appear in the report.
• Selected Cartridge by Barcode — An individual tape cartridge.
Only tape cartridges that were associated with a TapeAlert
during the specified Date Range appear in the report.
• Sorting— Specifies how the data will be sorted. Choose from the
following:
• Alphabetical
• Count (ascending)
• Last Occurrence (default)
You can only access this report from the Web client. The path to open the
report is Reports > Advanced Reporting > Media Integrity Analysis.