Users Guide

Chapter 8 Library Managed Encryption
Configuring the Dell Encryption Key Manager (EKM) on the Library
Dell PowerVault ML6000 User’s Guide 152
Step 4: Running EKM
Path Diagnostics 8
Perform EKM Path Diagnostics as described in Using EKM Path
Diagnostics on page 156.
Step 5: Configuring
Partitions for Library
Managed Encryption 8
Encryption on the Dell PowerVault ML6000 tape library is enabled by
partition only. You cannot select individual tape drives for encryption;
you must select an entire partition to be encrypted.
Configure the partitions as follows:
1 From the Web client, select Setup > Encryption > Partition
Configuration.
A list of all your partitions displays, along with a drop-down list
displaying the encryption method for each partition. The Encryption
Method applies to all encryption-capable tape drives and media in that
partition. Table 7 on page 152 describes the partition encryption methods.
Table 7 Partition Encryption
Methods
Encryption Method Description
Library Managed For use with EKM. Enables encryption support
via a connected Dell EKM key server for all
tape drives and encryption-capable media
assigned to the partition.