Users Guide

Dell PowerVault ML6000 User’s Guide 161
Chapter 9
9Running Your Library
This chapter explains how to access and operate your library. Most of the
library functions described here can be found on the Operations menu.
Powering on the Library
To power on the library:
1 Connect all power cords to their electrical source.
2 Turn on each power supply using the switch on the rear of the power
supply.
3 Press the power button located on the front door of the 5U Library
Control Module.
When you power on the library, the library performs a self-test to ensure
that all of its parts are functioning properly. All tape drives and partitions
are brought online.
Note: The information in this chapter assumes you are using the
Web client. Differences in functionality between the Web
client and the operator panel are noted.