Users Guide

Chapter 10 Getting Information – Logs and Reports
Viewing Logged-in Users
Dell PowerVault ML6000 User’s Guide 193
• IPv6 Settings (if IPv6 is enabled) — DHCP enabled/disabled,
Stateless enabled/disabled, Static enabled/disabled, network prefix,
gateway, and all IPv6 addresses.
• SSL — SSL, port, and cipher of the library.
• SMI-S — access and state enabled/disabled settings of the library.
• Access: Indicates whether the SMI-S port for SMI-S traffic to the
library (port 5988) is enabled or disabled. You can change the
setting via the operator panel, Tools > Security menu. The default
setting is enabled.
• State: Indicates whether allowing SMI-S to run on the library is
enabled or disabled. You can change this setting on the operator
panel, Tools > System Settings. The default is disabled.
• SNMP — access enabled/disabled, V1 enabled/disabled, V2
enabled/disabled, V3 enabled/disabled, algorithm, encryption
enabled/disabled, and port.
• SNMP-Traps — IP addresses and ports.
The path to open the report from the Web client is Reports > Network
Settings
.
Viewing Logged-in Users
The Logged-in User’s Report report contains information about the users
that are currently logged into the library. The report contains the
following information:
• User name — Name of logged-in user.
• Role name — Privilege level of logged-in user (for example, Admin for
administrator, User for non-administrator, non-service user).
• Login date and time — Date and time the user logged into the library.
• Last activity date and time — Date and time the user last logged into
the library.
• Login location — IP address or host name of the system being used to
access the system.