Users Guide

Chapter 12 Installing, Removing, and Replacing
Cabling the Library
Dell PowerVault ML6000 User’s Guide 214
Figure 20 LTO-5 Dual Port
SAS Tape Drive
Cabling Libraries With
SCSI Tape Drives 12
Use this procedure, along with Figure 21 and Figure 22, if you are
installing a library that includes SCSI tape drives:
1 SAS port 1 - use this port
2 SASport2-donotuse
3 Ethernet port - do not use
Warning: All libraries taller than 14U must be installed in a rack
having a main protective earthing (grounding) terminal,
and power must be supplied via an industrial plug and
socket-outlet and/or an appliance coupler complying with
IEC 60309 (or an equivalent national standard) and having
a protective earth (ground) conductor with a cross
sectional area of at least 1.5 mm
2
(14 AWG).
To ensure proper airflow and access space, Allow 60 cm
(24 inches) in the front and back of the library.