Users Guide

Chapter 12 Installing, Removing, and Replacing
Adding 9U Library Expansion Modules to an Existing Library
Dell PowerVault ML6000 User’s Guide 274
9 Repeat these steps for each module you need to re-install in the
library configuration.
Preparing to Use the
Library 12
Prepare to use the library as follows:
1 Add the tape drives to the modules. For details, see Adding,
Removing, and Replacing Tape Drives on page 354.
2 Add the power supplies. For details, see Adding, Removing, and
Replacing Power Supplies on page 330.
3 Add the LCB to the 5U Library Control Module. For details, see
Removing and Replacing the Library Control Blade and LCB
Compact Flash Card on page 320.
1 Y-rail in unlocked, functional position