Users Guide

Dell PowerVault ML6000 User’s Guide 56
Chapter 5
5Configuring Your Library
Once you have installed the hardware as described in Chapter 2, Setting
Up the PowerVault ML6000 Library, you are ready to configure your
library’s settings. A Setup Wizard helps you get started configuring your
library, and menu commands on both the operator panel and the Web
client allow you to reconfigure your library at any time.
About the Setup Wizard
When you first power on the library, the operator panel displays the
Setup Wizard, which walks you through the initial configuration of the
library’s basic operational settings.
The Setup Wizard on the operator panel only runs once, at initial startup.
After that, administrators access the Setup Wizard any time via the Web
client or use commands on the Setup and Operations menus to modify all
library settings, including network settings. See Completing the Library
Configuration With Menu Commands on page 57.
Caution: Always save the library configuration after modifying
configurable items. This will allow you to restore the most
current settings if necessary. See Saving and Restoring the
Library Configuration on page 384.