Setup Guide

Dell PowerVault ML6000 Getting Started Guide 21
LTO-5 SAS Tape Drive
Connecting Fibre Channel Cables to a Host or Switch
Perform this step if your library contains Fibre Channel tape drives that you will be
connecting directly to a host or switch.
Use Fibre Channel cables to connect your host (or switch) to the library. For each
tape drive:
1 Connect one end of the Fibre Channel cable to the Fibre Channel port on the
tape drive.
2 Connect the other end of the Fibre Channel cable to your host or switch.
1 SAS port 1 - use this port 2 SAS port 2 - do not use
3 Ethernet port - do not use