Users Guide
Configuring 3.1 Target 13
d
Select the desired highly available iSCSI instance from the drop-down
menu and click
Next
.
e
Click
Finish
. The Target is successfully created.
4
Move the volume to the desired highly available iSCSI instance:
a
Launch the Cluadmin interface and locate the volume that the
devices (
.vhd
files) are located on. The volume may be located in
Cluster Groups
.
b
Select the volume, right-click, and select
Change Groups
.
c
Select one of the newly-created highly available iSCSI instances where
you want to move the volume.
d
A dialog box appears to confirm if you are changing groups. Click
Yes
and click
Yes
again.
5
Import devices by performing the following:
a
Right-click the
Devices
icon in the
Microsoft Management Console
and select
Import Virtual Disk
. Click
Next
.
b
Browse to the volume the .
vhd
files are located on. Select the
.vhd
file,
click
OK
.
c
Click
Next
and then click
Finish
.
d
Repeat step b and step c to import all
.vhd
files.
6
Create Virtual Disk-Target Associations by performing the following:
a
Right-click the Target and select
Add existing virtual disk
.
b
Select the virtual disk you want to add and click
OK
.
c
The virtual disk is associated to the Target and is ready for use.
However, the storage disks are not ready for use. To resume usage of the
storage disks from the Initiator:
a
Go to the Host or the Initiator and log on to the Targets that you
created.
b
Go to disk management and verify that the disk is accessible and is
displayed as
Healthy
. If the disk is not active, right-click on the
volumes and click
Reactivate
.