Users Guide

14 Configuring 3.1 Target
Creating a Target in a Non-Clustered Environment
Perform the following steps to re-create the Targets and re-assign the .vhd files
in a non-clustered environment:
1
Perform the following steps to configure the iSCSI Initiator to discover
the Target:
a In the Discovery tab of the iSCSI Initiator, add the IP address of the
newly created highly available iSCSI instance. Click
Advanced and
configure the following properties:
•
Local Adapter — Microsoft iSCSI Initiator
• Source IP —IP address of the client for iSCSI traffic
b If you are using iSNS server, right-click on iSCSI Target icon in
Microsoft Management Console → Properties → iSNS tab and add
iSNS IP address.
c Go to Initiator and add iSNS IP address in the Discovery tab.
2 To configure the Target, perform the following:
a Right-click the Tar g et icon in the Microsoft Management Console
and click
Create iSCSI Target .
b Enter the Target name, Target description, and click Next .
c Browse for desired IQN identifier or click Advanced → Add → IP address
and enter the IP address of the Initiator. Click
Next .
d Select the desired Target from the drop-down menu and click Next .
e Click Finish . The Target is successfully created.