Users Guide

Configuring 3.1 Target 15

Import devices by performing the following:

Right-click the

Devices

icon in the

Microsoft Management Console

and select

Import Virtual Disk

. Click

Browse to the volume the .

vhd

files are located on. Select the

.vhd

file,

click

Click

and then click

Finish

Repeat step b and step c to import all

.vhd

files.

Create Virtual Disk-Target Associations by performing the following:

Right-click the Target and select

Add existing virtual disk

Select the virtual disk that you want to configure and click

The virtual disk in associated to the Target and ready for use.

However, the storage disks are not ready for use. To resume usage of the

disks from the Initiator:

Go to the Host or Initiator and log on to the Targets that you created.

Go to disk management and verify that the disk is accessible and is

displayed as

Healthy

. If the disk is not active, right-click on the

volumes and click

Reactivate

Unsupported Configurations

Using the 3.0 and 3.1 Targets together in the same cluster configuration is not

supported.