Users Guide
Introduction 5
Introduction
This document provides information about the various upgrade operations
you can perform on your Dell™ PowerVault™ NX1950 storage solution.
The following upgrade options are discussed in this document:
• "Using the Dell PowerVault MD1000 Storage Enclosure to Expand the
Storage on the PowerVault NX1950 Integrated Solution" on page 7.
• "Adding SATA II Support to Your Dell PowerVault NX1950 Integrated
Solution" on page 7.
• "Upgrading Your Dell PowerVault NX1950 Integrated and Gateway
Solutions to Enable iSCSI Active/Active Target" on page 9.
• "Upgrading Your Dell™ PowerVault™ NX1950 Gateway Solution With the
Latest Solution Stack" on page 17.
Terms Used in This Document
PowerVault NX1950 Integrated Solution/Integrated Solution—is the
configuration of PowerVault NX1950 storage system(s) with
Dell PowerVault MD3000 storage array.
PowerVault NX1950 Gateway Solution/Gateway Solution—is the
configuration of PowerVault NX1950 storage system(s) with Dell|EMC
storage array.
For more information, see the Installation Guide that shipped with your system.
NOTE: Ensure that your system is running Microsoft
®
Windows
®
Unified Data
Storage Server 2003 SP2 which is a pre-requisite for the Active/Active iSCSI Target
configuration.