Users Guide
Table Of Contents
- Lifecycle Controllerユーザーズ ガイド
- 目次
- はじめに
- Lifecycle Controller の使用
- Operating system deployment
- 監視
- ファームウェアアップデート
- 設定
- システムコントロールパネルのアクセスオプション
- iDRAC の設定
- システム時刻と日付の設定
- RAID の設定
- ソフトウェア RAID を使用した RAID の設定
- RAID コントローラ上でのセキュアな仮想ディスクの作成
- Key encryption
- ローカルキー暗号化モード
- ミラードライブの解除
- System setup — Advanced Hardware Configuration
- Collect System Inventory On Restart
- ローカル USB ドライブの設定
- NFS および CIFS サーバーの設定
- Conditions while configuring HTTP or HTTPS server
- 保守
- 使いやすいシステムコンポーネント名
- セットアップユーティリティとブートマネージャの使用
- トラブルシューティングとよくあるお問い合わせ(FAQ)
NOTE: If you select FTP Server, you can verify the connection by clicking Test Network Connection. If the domain name is
provided, then the server IP address and the domain name is displayed. If proxy IP is provided, then the proxy IP along with the
server IP is displayed.
NOTE: If you select Network Share (CIFS, NFS, HTTP, or HTTPS), you can verify the connection by clicking Test Network
Connection. By default, Lifecycle Controller pings the host and proxy IP.
5. Type or select the appropriate data.
NOTE: In the FilePath or Update Package Path field, you can directly enter the customized name for the catalog file. For example
DUP\adc.xml.
6. Click Next.
The Select Updates page is displayed with the catalog file, catalog version, and component names for which the updates are available.
7. Select the components that require an update, and then click Apply.
The update process is initiated, and the firmware update is completed. After restart, the system is ready to use.
NOTE: The system does not restart if operating system driver packs, OS collector tool, or hardware diagnostics are updated.
NOTE: When applying more than one update, the system may restart between updates. In this case, Lifecycle Controller restarts
the server and automatically continues the update process.
NOTE: iDRAC resets while updating iDRAC. If the iDRAC firmware update is interrupted for any reason, wait for up to 30 minutes
before you attempt another firmware update.
NOTE: After the CPLD firmware is updated on the modular servers, on the View Current Versions page, under Firmware Update,
the firmware update date is displayed as 2000-01-01, regardless of the actual update date. The updated date and time are
displayed based on the time zone that is configured on the server.
NOTE: On a PowerEdge server, if you use Lifecycle Controller to update the Intel network card firmware from version 15.0.xx to
16.5.xx or conversely, reboot the server to view the updated firmware.
NOTE: If you update the Intel Network Card firmware from version 14.5.x to 16.5.xx or vice versa on a PowerEdge server by
using Lifecycle Controller, the Firmware Rollback page may display the firmware version as 15.0.xx instead of 14.5.x . However,
the Firmware Rollback page displays the version 14.5.x if you update the firmware by using the Intel Network firmware DUPs on
the OS.
アップデートタイプとアップデートソースの選択
アップデートを実行するには、[ファームウェアアップデート] ウィザードを使用して、次の 1 つに シングルコンポーネント DUP
またはリポジトリ([Catalog.xml])をダウンロードできます。
メモ: [Catalog.xml] ファイルには、個別のサーババンドルが含まれています。各バンドルには、すべての DUP 情報(md5 セ
キュリティキー、日付と時刻、パス、リリース ID、バージョンなど)が含まれます。
● FTP サーバー - ローカル FTP、またはプロキシ サーバーを使用する FTP サーバー。
メモ: リポジトリ(カタログファイル)および DUP が、ソースのルートフォルダにコピーされていることを確認します。
● ローカルドライブ - USB ドライブ、『Dell EMC Server Updates』DVD または『Lifecycle Controller OS
ドライバパック
』DVD を使
用します
● ネットワーク共有(CIFS、NFS、HTTP および HTTPS)
ローカルドライブの使用
Lifecycle Controller では、ローカルで使用できる DVD や USB ドライブ、または仮想メディアを使用してファームウェアのアップデ
ートを実行することができます。この柔軟性により、ネットワークトラフィックが多いときも効率よくアップデートプロセスを実
行できます。アップデートレポジトリを選択すると、Lifecycle Controller が自動的に必要なアップデートを検出し、選択して特定し
たコンポーンネント上でアップデートを実行します。
ローカルドライブのレポジトリにアクセスするには、DVD または USB ドライブ上にレポジトリを作成して、それをサーバーにロ
ーカルで接続するか、仮想メディアを使用してください。
32 ファームウェアアップデート