Reference Guide

hardware NAS-appliances attach-controller
Description
Attach a NAS controller.
NOTE: The NAS controller must be in standby mode, and powered ON. A NAS controller is ON and
in standby mode if the power LED is flashing green at around 2 flashes per second.
Format
hardware NAS-appliances attach-controller <ApplianceID>
<ControllerID>
Arguments
Argument Description Format
<ApplianceID> NAS appliance ID Existing NAS appliance ID
<ControllerID> NAS controller ID Existing NAS controller ID
Example
Attach a NAS controller where the NAS appliance ID is 1 and the NAS controller ID is 0:
CLI> hardware NAS-appliances attach-controller 1 0
hardware NAS-appliances add-appliance
Description
Add a NAS appliance.
NOTE: The NAS controllers in the new NAS appliance must be in standby mode, and powered ON.
A NAS controller is ON and in standby mode if the power LED is flashing green at around 2 flashes
per second.
Format
hardware NAS-appliances add-appliance <ApplianceServiceTag>
Arguments
Argument Description Format
<ApplianceServiceTag> Service Tag of the NAS appliance Existing Service Tag of additional
NAS appliance
59