Reference Guide

Arguments

Argument Description Format

<Name> Name of the iSCSI fabric Existing iSCSI fabric name

Example

Delete an iSCSI fabric named SANb:

CLI> hardware fabrics iSCSI delete SANb

hardware fabrics iSCSI add

Description

Add an iSCSI fabric.

NOTE: This command is available only on 10GbE iSCSI NX3600 appliances.

Format

hardware fabrics iSCSI add <Interface> <Netmask>

<ControllersIPs> {options}

Arguments

Argument Description Format

<Interface> Interface of the new iSCSI fabric Ethernet interface in the

following format: ethXX (for

example, eth30)

<Netmask> Netmask of the new iSCSI fabric IP address in the format: 'x.x.x.x'

<ControllersIPs> NAS controller IP addresses Comma-separated list of IP

addresses in the format: 'x.x.x.x'

Options

Option Description Format

-VLANTag <VLANTag> VLAN ID of the fabric Whole positive number (1 to

4094)

Example

Add an iSCSI fabric on the eth30 interface where the netmask is 255.255.255.0 and the NAS controller IP

addresses are 192.11.18.10 and 192.11.18.11:

CLI> hardware fabrics iSCSI add eth30 255.255.0.0 192.11.18.10,192.11.18.11