User guide

Dell PowerVault^*^ TL4000/TL2000 Failover Guide
code was sent to you. Please follow the instructions on the failover authorization code
certificate to obtain your license key. The authorization code you were sent will not
activate the feature on the library.
Please refer to the Dell PowerVault™ TL2000 Tape Library and TL4000 Tape Library
User's Guide for instructions on accessing and navigating the RMU.
The library validates the entered license key and provides a "Failover Enabled" message
upon successful completion. In the event you enter the wrong license key, the library
returns a "Key Not Validated" failure message.
1. Navigate to Configure Library -> Path Failover.
2. Enter the Path Failover 12-digit license key in the spaces provided.
Figure 12: PowerVault^" TL4000 Failover Activation screen
3. Click Activate to save the license key and activate failover on the library. The following
screen displays if you have correctly entered the license key.
* -T*
Figure 13: PowerVault'" TL4000 RMU screen after failover has been activated
Entering Path Failover Feature Activation Key via Operator Control Panel (OCP)
If you ordered failover at point of sale, the envelope containing the failover
authorization code is located in the accessory box that came with your unit. If you
ordered failover after point of sale, an envelope containing your failover authorization
code was sent to you. Please follow the instructions on the failover authorization code
certificate to obtain your license key. The authorization code you were sent will not
activate the feature on the library.
Please refer to the Dell PowerVault™ TL2000 tape Library and TL4000 Tape library
User's Guide for instructions for navigating with the OCP.
17 ¡Page 12/31/09version2.0
Always refer to www.dell.comXsupport for latest documentation and updates