User's Manual

1. Press the UP (1) or DOWN(4) keys to enter Interaction Mode. The Main
Selection Menu will appear. The Main Selection screen shows Monitor, Control,
Configure, and Service.
2. Scroll to your selection, then press the SELECT (3) key. The sub-menu for the
selected menu item will appear.
3. Use the UP (1) or DOWN(4) and SELECT (3) keys to scroll until you get
to the area/screen you wish to configure.
4. Use the CANCEL (2) key if you wish to move backwards through the menu
selections.
Operator Control Panel Menu Tree
The Operator Control Panel Main menu is made up of the following items:
v Monitor
v Control
v Configure
v Service
The table below shows each Main menu item and the associated sub menu items.
Chapter 5. Operations 5-9