User's Manual

ManualsBrandsDell ManualsComputer HardwarePowerVault TL2000

141

142

143

144

145

146

147

148

149

150

Note: Follow the instructions in the Dell PowerVault TL4000 Failover Configuration

Guide to configure your environment for failover.

Configure Library: Encryption

Note: Application Managed Encryption (AME) does not require a license key.

Library Managed Encryption requires a license key. Contact your TSR

(technical sales representative) to purchase this feature.

Important: The Advanced Encryption Settings are for Engineering Support use

only. These fields should always be set to "No Advanced Setting".

Minimum Prerequisites for Application Managed Encryption (AME) - LTO 6:

v SAS and Fibre Channel LTO Ultrium 6 Tape Drive

v Ultrium 6 Tape Cartridge

v Library firmware level B.50 or higher

v Drive firmware level C800 or higher, for reference go to http://support.dell.com.

v Tape backup software application that supports LTO 6 encryption

Minimum Prerequisites for Application Managed Encryption (AME) -LTO 5:

v SAS and Fibre Channel LTO Ultrium 5 Tape Drive

v Ultrium 5 Tape Cartridge

v Library firmware level 9.00 or higher

v Drive firmware level BBNE/BBNF or higher, for reference go to

http://support.dell.com.

v Tape backup software application that supports LTO 5 encryption

Minimum Prerequisites for Application Managed Encryption (AME) - LTO 4:

v SAS and Fibre Channel LTO Ultrium 4 Tape Drive

v Ultrium 4 Tape Cartridge

v Library firmware level 5.80 or higher

v Drive firmware level 77BE or higher

v Tape backup software application that supports LTO 4 encryption

Minimum Prerequisites for Library Managed Encryption (LME) - LTO 6: