User's Manual

I
IBM Security Key Lifecycle Manager (SKLM)
IBM's EKM application that assists encrypting tape drives in generating,
protecting, storing, and maintaining encryption keys that encrypt
information that is written to and decrypt information that is read from
tape media.
ID Identifier.
identifier (ID)
(1) In programming languages, a lexical unit that names a language object;
for example, the names of variables, arrays, records, labels, or procedures.
An identifier usually consists of a letter optionally followed by letters,
digits, or other characters. (2) One or more characters that are used to
identify or name data element and possibly to indicate certain properties of
that data element. (3) A sequence of bits or characters that identifies a
program, device, or system to another program, device, or system.
IEC International Electrotechnical Commission.
IML Initial microprogram load.
incompatible magazine
This message might display on the Operator Panel during library
initialization. It occurs during factory restore or VPD. This message is not a
real issue since it takes time for the library to configure.
initial microprogram load (IML)
The action of loading a microprogram from an external storage to writable
control storage.
initiator
The component that runs a command. The initiator can be the host system
or the tape control unit.
INST Installation.
interface
A shared boundary. An interface might be a hardware component to link
two devices or it might be a portion of storage or registers accessed by two
or more computer programs.
Internet Protocol Version 4 (IPv4)
See IPv4.
Internet Protocol Version 6 (IPv6)
See IPv6.
intervention required
Manual action is needed.
INTRO
Introduction.
I/O Input/output.
I/O Station
Cartridge location that is dedicated for the insertion of cartridges into and
the removal of cartridges from the library.
IOP Input/output processor.
IP Internet Protocol.
Glossary I-9