User's Manual

meter In the Metric System, the basic unit of length; equal to approximately 39.37
inches.
MIB Management Information Base. Information repository that is used by
SNMP.
micro One millionth of.
microcode
(1) One or more micro instructions. (2) A code, representing the
instructions of an instruction set, which is implemented in a part of storage
that is not program-addressable. (3) To design, write, and test one or more
micro instructions. (4) See also microprogram.
microdiagnostic routine
A program that runs under the control of a supervisor, usually to identify
field replaceable units.
microdiagnostic utility
A program that is run by the customer engineer to test the machine.
microinstruction
A basic or elementary machine instruction.
microprogram
A group of microinstructions that when run performs a planned function.
The term microprogram represents a dynamic arrangement or selection of
one or more groups of microinstructions for execution to perform a
particular function. The term microcode represents microinstructions that
are used in a product as an alternative to hard-wired circuitry to
implement certain functions of a processor or other system component.
MIM Media information message.
mm Millimeter.
modifier
That which changes the meaning.
mount a device
To assign an I/O device with a request to the operator.
MP Microprocessor.
ms Millisecond.
MSG Message.
multipath
Pertaining to using more than one path.
N
N/A Not applicable.
Network Address Translation (NAT)
NAT involves rewriting the source or destination addresses of IP packets
as they pass through a router or firewall. Most systems that use NAT do so
to enable multiple hosts on a private network to access the Internet over a
single public IP address.
NEMA
National Electrical Manufacturers Association.
I-12 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide