User's Manual
b. Rack Kit B: The following parts make up Rack Kit B.
v Packaged in plastic material:
– 2 rails (not shown) See Figure 4-10 on page 4-10 for a graphic of the
rails.
– 2 mounting brackets with captive thumb screws (1 in Figure 4-7)
v Packaged in small bags and labeled with part numbers:
– 1 Torx wrench (5 in Figure 4-7)
– 2 anchors (4)
– 2 countersunk screws for securing the anchors (6)
– 2 small countersunk screws for securing the tops of the mounting
brackets (7)
v Packaged in the small bag 4 rail mounting screws to be used on racks
with round or square holes (8).
v 12 black plastic square plugs for covering rack holes for the 4U library
application (2)
v 12 black plastic round plugs for covering rack holes for the 4U library
application (3)
2. Determine the location in your rack for your library to be installed and, using a
pencil, mark the location on each vertical rail in your rack.
Note: A 2U library requires 2U (3.5 in.) of rack space. A 4U library requires 4U
(7 in.) of rack space.
a77ug292
3
2
8
1
6
7
4
5
Figure 4-7. Rack Kit B mounting hardware
4-8 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide