User's Manual

2U Library I/O station
The I/O (input/output) station (see Figure 4-41 on page 4-40) in a 2U library is
part of the left magazine. To open the I/O station, select Control > Open I/O
Station. The I/O station slot opens, and the "Unlocking I/O station" message
displays. Wait for the "Insert/remove cartridge and close I/O station" message to
insert or remove the cartridge, then close the I/O station by gently pushing the
slot back into the left magazine.
Note: It is recommended to wait for the messages before you insert or remove
cartridges to ensure that the library is ready to handle the cartridges.
a77ug24
1
Figure 4-39. 2U library left magazine
a77ug242
Figure 4-40. 2U library right magazine
Chapter 4. Installation and Configuration 4-39