User's Manual

4U library I/O station
The I/O station in a 4U library (see Figure 4-44) is part of the lower left magazine.
To open the I/O station, select Control > Open I/O Station. The I/O station slot
opens, and the "Unlocking I/O station" message displays. Wait for the
"Insert/remove cartridge and close I/O station" message to insert or remove the
cartridge, then close the I/O station by gently pushing the slot back into the left
magazine.
Note: It is recommended to wait for the messages before you insert or remove
cartridges to ensure that the library is ready to handle the cartridges.
There are finger holes on the back side of the I/O station (see 1 in Figure 4-45 on
page 4-42) that allow the user to push the cartridges out of the I/O station.
a77ug249
Figure 4-43. 4U library right magazines
a77ug24
6
Figure 4-44. 4U library I/O station in the lower left magazine
Chapter 4. Installation and Configuration 4-41