CLI Guide

Drive Type
Cleaning with a Good Tape
Cleaning with an Expired Tape
•
Status light on solid
amber.
• Ejects tape when
complete.
Dell PowerVault
110T LTO-2
No seven segment display
indicator.
• Activity light blinks
green.
• Ejects tape shorty
after.
•
Pre firmware 53Y3: No seven
segment display indicator. Activity
light blinks green but ejects tape
shortly after inserting.
• Firmware 53Y3 and newer:
• Seven segment display shows 7
• Activity light blinks amber
• Ejects tape shortly after inserting.
When tape is completely
removed, all light indicators turn
off.
Dell PowerVault
110T LTO-2-L
(Certance)
•
Power light on solid
green.
• Activity light on solid
green.
• Status light on solid
amber.
• Ejects tape when
complete.
•
Power light on solid green.
• Activity light on solid green.
• Status light blinks amber.
• Ejects tape shortly after inserting.
Dell PowerVault
110T LTO-2-L
(Tandberg)
•
Press and hold the
Eject button for 6
seconds. The drive
enters the service
mode indicated by all
LEDs flashing slowly.
• Press Eject twice. The
• Activity LED flashes
fast.
• Ejects tape shorty
after.
• Cleaning light turns on.
• Activity light flashes.
• Fault light flashes.
• Cartridge hold in the drive
When pressing Eject button, the
cartridge is ejected and the Cleaning
light stays on.
Dell PowerVault
110T LTO-3
No seven segment display
indicator.
• Activity light blinks
green
• Ejects tape shorty
after.
•
Seven segment display shows 7.
• Activity light blinks amber.
• Ejects tape shortly after inserting.
When tape is completely
removed, all light indicators turn
off.
Dell PowerVault
LTO3-060
No seven segment display
indicator.
•
Cleaning light blinks amber.
• Ejects tape shortly after inserting.
When tape is completely
19 Dell PowerVault Tape Systems | A05