Instruction Manual


1
Power cord
2
S-video cable
3. Connecting with composite cable:

1
Power cord
2
Composite video cable
Powering On/Off the Projector
Powering On the Projector
NOTE: Turn on the projector before you turn on the source.
1. Remove the lens cap.
2. Ensure that the power cord and appropriate signal cable(s) are securely connected. The power button light blinks green.
3. Press the power button to turn on the projector. The Dell logo will be displayed for 30 seconds.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.
l If the "Searching for signal..." message appears on the screen, ensure that the appropriate signal cable(s) are securely connected.
l If you are connecting multiple sources to the projector simultaneously, press the Source button on the remote control or control panel to select the
desired source.