Instruction Manual

Back to Contents Page
UsingYourProjector:Dell™2100MPProjector
Control Panel
Remote Control
On-Screen Display
Control Panel


Power
See "Powering On/Off the Projector."
Source
Press to step through Analog RGB, Composite, Component-I, S-video, and Analog YPbPr sources when multiple sources are connected to the
projector.
Resync
Press to synchronize the projector to the input source.
Resync will not operate if the OSD (On-Screen Display) is displayed.
Menu
Press to activate the OSD. An input signal is required to activate the OSD. Use the directional keys and Menu button to navigate through the OSD.
Four Directional Keys
The four directional keys can be used to toggle through the tabs in the OSD.
Keystone
Press or button to adjust image distortion caused by tilting the projector. (± 16 degrees)
Remote Control

Power
See "Power On/Off the Projector."
Source
Press the Source button to choose Analog RGB, Composite, Component-I, S-video, and Analog YPbPr sources.
Resync
Press to synchronize the projector to the input source.
Resync will not operate if the OSD (On-Screen Display) is displayed.