Instruction Manual

Select this function to fit 1:1, 16:9 (16:9U) or 4:3 aspect ratio. In order to use the 1:1 aspect ratio, the input must be a
computer signal (through VGA cable) less than SVGA (800 x 600), component 576p/ 480i / 480p, S-Video, or Video
(composite). If the input signal is a computer signal greater than SVGA or component 1080i / 720p, only 16:9 (16:9U) or
4:3 aspect ratio will be available. When an icon is selected, the color of the icon will change to dark blue.

Video Mode
Select this function to optimize the display image for home use (Movie Mode), conference use (PC Mode) or as user
preferable settings (User Mode). When an icon is selected, the color of the icon will change to dark blue. The default
setting is PC Mode. While adjusting the settings of White Intensity or Degamma tab, it will jump to User Mode
automatically.

White Intensity
White Intensity can be adjusted between 0 and 10.
l Setting 10 will maximize the brightness.
l Setting 0 will maximize color reproduction quality.
Degamma
Degamma can be adjusted between 0 and 4. Default setting is 3 (Recommended). Adjustment of the setting will change
the color performance of the display.
Management Menu

Management

Menu Location
Select the location of the OSD on the screen.

Projection Mode