User Manual

Setting Up the Monitor | 23
Using the Mobile-High Definition Link (MHL)
NOTE: This monitor is MHL certified.
NOTE: To use the MHL function, use only MHL certified cable and source devices
that support MHL output.
NOTE: Some MHL source devices may take more than a few seconds or longer to
output an image, depending on MHL source devices.
NOTE: When the connected MHL source device enters Standby mode, the monitor
displays a black screen or the message below, depending on MHL source device's
output.
To enable MHL connection, please perform the below steps:
1 Plug the power adapter to your monitor and to a power outlet.
2 Connect the (micro) USB port on you MHL source device to HDMI (MHL) port on
the monitor with a MHL certified cable (See
Bottom View for details).
3 Turn On the monitor and the MHL source device.
4 Select input source on monitor to HDMI (MHL) by using OSD Menu (See Using the
On-Screen Display (OSD) Menu
for details).
5 If the monitor does not display an image, see
Mobile High-Definition Link (MHL)
Specific Problems .
book.book Page 23 Wednesday, October 7, 2015 9:21 AM