Dell S2417DG Monitor User’s Guide Model: S2417DG Regulatory model: S2417DGb
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ____________________ Copyright © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the On-Screen Display (OSD) Menu . . . . . . . . . . . . . . . . . . . . . 29 Setting the Maximum Resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Using the Tilt, Swivel, and Vertical Extension . . . . . . . . . . . . . . . . . . 36 Rotating the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Adjusting the Rotation Display Settings of Your System . . . . . . . . . 38 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .
About Your Monitor Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and Contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.
Power Cable (Varies by Countries) DP Cable USB 3.0 Upstream Cable (Enables the USB Ports on the Monitor) • Drivers and Documentation Media • Quick Setup Guide • Safety, Environmental, and Regulatory Information Product Features The Dell S2417DG flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include: 6 • 60.47 cm (23.8-inch) viewable area (measured diagonally).
• The color modes also offers different game modes, including FPS (First-Person Shooter), RTS (Real-Time Strategy), and RPG (Role-Playing Game). • Software and documentation media includes an Information File (INF), Image Color Matching File (ICM), and product documentation. • Security lock slot. • Stand lock. • Arsenic-Free glass and Mercury-Free for the panel only. • 0.5 W standby power when in sleep mode. • Energy Gauge shows the energy level being consumed by the monitor in real time.
Back View Back view with monitor stand Label 8 Description Use 1 VESA mounting holes (100 mm x 100 mm behind attached VESA Cover) Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm). 2 Regulatory label Lists the regulatory approvals. 3 Stand release button Releases stand from monitor. 4 Security lock slot Secures monitor with security lock (security lock not included).
Side View Label Description Use 1 USB 3.0 port Connect your USB device. NOTE: To use this port, you must connect the USB cable (shipped with your monitor) from the USBupstream port on the monitor to your computer. 2 USB 3.0 port with PowerShare Connect your USB device (also supports fast charging). 3 Headphone-out jack Connect the headphones.
Bottom View Bottom view without monitor stand Label 10 Description Use 1 Power cable connector Connect the power cable (shipped with your monitor). 2 Stand lock feature To lock the stand to the monitor using a M3 x 6 mm screw (screw not included). 3 Line-out port Connect your speakers. NOTE: This port does not support headphones. 4 DisplayPort Connect to your computer using the DP cable (shipped with your monitor). 5 HDMI port Connect to your computer using the HDMI cable.
Monitor Specifications Flat Panel Specifications Model S2417DG Screen type Active matrix - TFT LCD Panel technology TN Aspect ratio 16:9 Viewable image Diagonal 604.7 mm (23.8 inches) Horizontal, Active Area 526.85 mm (20.74 inches) Vertical, Active Area 296.35 mm (11.67 inches) Area 156131.99 mm2 (242.04 inch2) Pixel pitch 0.2058 mm x 0.
Height adjustable stand 0 to 130 mm Tilt -5° to 21° Swivel -45° to 45° Pivot -90° to 90° Dell Display Manager Compatibility No Security Security lock slot (cable lock sold separately) * Color gamut (typical) is based on CIE1976 (82%) and CIE1931 (72%) test standards.
HDTV, 1280 x 720p 45 60 74.25 +/+ HDTV, 1920 x 1080p 55.6 50 141.5 -/+ HDTV, 1920 x 1080p 67.5 60 148.5 +/+ VESA, 2560 x 1440p 88.8 60 241.5 +/- DP Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/ Vertical) VESA, 640 x 480 31.5 60 25.2 -/- VESA, 800 x 600 37.88 60 40 +/+ VESA, 1024 x 768 48.36 60 65 -/- VESA, 2560 x 1440 88.8 60 241.5 +/- VESA, 2560 x 1440 127.4 85 346.
AC input voltage/frequency/ current Inrush current 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (typical) • 120 V: 30 A (Max.) at 0 °C (cold start) • 220 V: 60 A (Max.) at 0 °C (cold start) Physical Characteristics Model S2417DG Signal cable type • Digital: HDMI, 19 pins (cable not included) • Digital: DisplayPort, 20 pins • Universal Serial Bus: USB, 9 pins Dimensions (with stand) Height (extended) 493.9 mm (19.44 inches) Height (compressed) 363.9 mm (14.33 inches) Width 540.4 mm (21.
Environmental Characteristics Model S2417DG Compliant Standards • RoHS-compliant • Arsenic-Free glass and Mercury-Free for the panel only Temperature Operating 0 °C to 40 °C (32 °F to 104 °F) • Storage: -20 °C to 60 °C (-4 °F to 140 °F) • Shipping: -20 °C to 60 °C (-4 °F to 140 °F) Non-operating Humidity Operating 10% to 80% (non-condensing) • Storage: 5% to 90% (non-condensing) • Shipping: 5% to 90% (non-condensing) Non-operating Altitude Operating 5,000 m (16,404 ft) (maximum) Non-operating 12,19
Pin Assignments DisplayPort Connector Pin Number 16 20-pin Side of the Connected Signal Cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 GND 14 GND 15 AUX(p) 16 GND 17 AUX(n) 18 GND 19 Re-PWR 20 +3.
HDMI Connector Pin Number 19-pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the monitor. NOTE: This monitor is Super-Speed USB 3.0 compatible. Transfer Speed Data Rate Power Consumption* Super-speed 5 Gbps 4.5 W (Max, each port) High speed 480 Mbps 4.5 W (Max, each port) Full speed 12 Mbps 4.5 W (Max, each port) * Up to 2 A on USB downstream port (port with compliant devices or normal USB devices.
USB Downstream Connector Pin Number 9-pin Side of the Connector 1 VCC 2 D- 3 D+ 4 GND 5 SSRX- 6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ USB Ports • 1 upstream - bottom • 2 downstream - bottom • 2 downstream - side • Power Charging Port- the port with lightning icon; supports fast current charging capability if the device is BC1.2 compatible. NOTE: USB 3.0 functionality requires a USB 3.0-capable computer.
LCD Monitor Quality and Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: http://www.dell.com/support/monitors. Maintenance Guidelines Cleaning Your Monitor CAUTION: Read and follow the Safety Instructions before cleaning the monitor.
Setting Up the Monitor Attaching the Stand NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set up instructions. To attach the monitor stand: 1 Remove the cover and place the monitor on it. 2 Insert the two tabs on the upper part of the stand to the groove on the back of the monitor. 3 Press the stand till it snaps into place.
5 Insert the stand base blocks fully into the stand slot. 6 Lift the screw handle and turn the screw clockwise. 7 After fully tightening the screw, fold the screw handle flat within the recess.
Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Route the cables through the cable-management slot before connecting them. NOTE: Do not connect all cables to the computer at the same time. To connect your monitor to the computer: 1 Turn Off your computer and disconnect the power cable. 2 Connect the DP or HDMI cable from your monitor to the computer.
Connecting the USB 3.0 cable After you have completed connecting the DP/HDMI cable, follow the procedures below to connect the USB 3.0 cable to the computer and complete your monitor setup: 1 Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port on your computer. (See Bottom View for details.) 2 Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor. 3 Plug the power cables for your computer and monitor into a nearby outlet.
Removing the Monitor Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions. .To remove the stand: 1 Place the monitor on a soft cloth or cushion. 2 Press and hold the stand release button. 3 Lift the stand up and away from the monitor.
Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA-compatible wall mounting kit. 1 Place the monitor panel on a soft cloth or cushion on a stable, flat table. 2 Remove the stand. 3 Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover. 4 Attach the mounting bracket from the wall mounting kit to the monitor. 5 Mount the monitor on the wall by following the instructions that comes with the wall mounting kit.
Operating the Monitor Power On the Monitor Press the button to turn On the monitor. Using the Front-Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change. The following table describes the front-panel buttons: Front-Panel Button 1 Description Use this button to choose from a list of preset color modes.
Use the buttons to adjust the volume. Minimum is 0 (-). Maximum is 100 (+). 2 Shortcut key/ Volume Use the MENU button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the Menu System. 3 Menu Use this button to go back to the main menu or exit the OSD main menu. 4 Exit Use the Power button to turn the monitor On and Off. 5 Power (with power light indicator) The white light indicates the monitor is On and fully functional.
Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1 Press the button to launch the OSD menu and display the main menu. Main Menu for digital (DP) input 2 Press the and buttons to move between the setting options.
Icon Menu and Submenus Description Brightness/ Contrast Use this menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase the brightness and press the button to decrease the brightness (min. 0 / max. 100). Contrast Adjust the Brightness first, and then adjust the Contrast only if further adjustment is necessary. button to increase the contrast and press the Press the button to decrease the contrast (min. 0 / max.
Color Use Color to adjust the color setting mode. NOTE: The function is disabled when you are under 3D mode or ULMB mode. Preset Modes When you select Preset Modes, you can choose Standard, FPS Game, RTS Game, RPG Game, Warm, Cool, or Custom Color from the list. • Standard: Loads the monitor's default color settings. This is the default preset mode. • FPS Game: Loads color settings ideal for First-Person Shooter games. • RTS Game: Loads color settings ideal for Real-Time Strategy games.
Response Time ULMB Allows you to set the Response Time to Normal or Fast. ULMB (Ultra Low Motion Blur) helps have less of a motion blur effect while you are watching fast-moving images. When the graphics card supports G-SYNC, make sure that the Enable G-SYNC function is not selected in the NVIDIA Control Panel, ULMB will be automatically enabled. NOTE: This function is available when the refresh rate is 85 Hz, 100 Hz or 120 Hz.
Audio Volume Allows you to set the volume level of headphone output. or Use Reset Audio Menu Language to adjust the volume level from 0 to 100. Select this option to restore default audio settings. Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
Personalize Users can choose a feature from Preset Modes, Brightness/Contrast, Input Source, or Volume and set it as a shortcut key. NOTE: When you are under 3D mode or ULMB mode, Preset Modes may not be set as a shortcut key. Others Power Saving The default setting is On, letting the monitor go to sleep as the system sleeps. Selecting Off may prevent the monitor from going into deep sleep and being unable to wake up.
OSD Warning Message When the monitor enters the Power Saving mode, the following message appears: See Troubleshooting for more information. Setting the Maximum Resolution To set the maximum resolution for the monitor: In Windows® 7, Windows® 8, and Windows® 8.1: 1 For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Screen Resolution. 3 Click the Dropdown list of the Screen Resolution and select 2560 x 1440. 4 Click OK.
Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt, Swivel With the stand attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle. NOTE: The stand is detached when the monitor is shipped from the factory. Vertical Extension NOTE: The stand extends vertically up to 130 mm.
Rotating the Monitor Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted up to avoid hitting the bottom edge of the monitor.
Pivot counterclockwise NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to www.dell.com/support and see the Download section for Video Drivers for latest driver updates. NOTE: When in the Portrait View Mode, you may experience performance degradation in graphic-intensive applications (3D Gaming and etc.).
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer.
Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. To run the built-in diagnostics: 1 Ensure that the screen is clean (no dust particles on the surface of the screen).
Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms What You Experience Possible Solutions No Video/Power No picture LED off • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment. • Ensure that the power button is depressed fully.
Horizontal/ Vertical Lines Screen has one or more lines • Reset the monitor to factory settings. • Perform monitor self-test feature check and determine if these lines are also in self-test mode. • Check for bent or broken pins in the video cable connector. • Run the built-in diagnostics. Synchronization Screen is Problems scrambled or appears torn • Reset the monitor to factory settings. • Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.
Product Specific Problems Specific Symptoms What You Experience Possible Solutions Screen image is Image is too small centered on screen, but does not fill entire viewing area • Reset the monitor to factory settings. Cannot adjust the monitor with the buttons on the front panel • Turn Off the monitor, unplug the power cord, plug it back, and then turn On the monitor.
Universal Serial Bus (USB) Specific Problems Specific Symptoms What You Experience Possible Solutions USB interface is USB peripherals not working are not working • • • • • • High Speed USB 3.0 interface is slow High Speed USB 3.0 peripherals working slowly or not working at all • Check that your computer is USB 3.0-capable. • Some computers have USB 3.0, USB 2.0, and USB 1.1 ports. Ensure that the correct USB port is used. • Reconnect the upstream cable to your computer.
Appendix WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI). FCC Notices (U.S. Only) and Other Regulatory Information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.
