Users Guide

Setting Up the Monitor | 21
Setting Up the Monitor
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for the set up instructions.
To attach the monitor stand:
1 Remove the cov
er and place the monitor on it.
2 Insert the two
tabs on the upper part of the stand to the groove on the back of the
monitor.
3 Press the stand till it snaps into place.
4 Hold the stand base with the triangle mark, , facing upward. Then, align the
stand base protruded blocks to the matching slot on the stand.